钳行者系 · 适配 Leatherman ARCPlier Voyager family · fits the Leatherman ARC
ARC 系列ARC
Series
莱泽曼 ARC 是我最喜欢的一把多功能钳，钳行者的外轮廓就是照着它定的。可它手柄两侧的空间没用上，批头和小工具还得另外带。ARC 系列给它加上磁吸侧板和工具侧壳，合起来还是一把 ARC 的大小。 The Leatherman ARC is our favourite multi-tool; Plier Voyager's outline is taken from it. But the space along its handles goes unused, and bits and small tools still ride separately. The ARC Series adds magnetic side plates and a tool shell, and the whole thing stays ARC-sized.
- 外轮廓Outline
- ARC
- 模数Module
- 4 mm
- 磁铁Magnets
- 全系一种One spec
- 起点Since
- 2023
构件Components
两块侧板，一个侧壳Two plates and a shell
侧板用磁铁贴在 ARC 手柄上，不打孔、不改钳子，拿下来就是原样的 ARC。磁吸位置和钳行者一致，两边的扩展片可以互相借用。The plates attach to the ARC's handles with magnets. No drilling, no modification; take them off and it's a stock ARC again. The magnet positions match Plier Voyager, so plates can move between the two.
- S-01磁吸底板Magnetic base plate贴住 ARC 手柄，提供磁吸位。Sits on the ARC handle and carries the magnets.3.6
- S-02扁批头板Flat bit plate刻好尺寸的批头槽，莱泽曼扁批头一格一个。Labelled slots, one Leatherman flat bit each.3.6
- S-03工具侧壳Tool shell收一支批头延长杆和两件小工具，抽出来就能用。Holds a bit extender and two small tools that slide straight out.12
- W-01扳手附件Wrench add-on2025 年的无损携带扳手，给钳子补上扳手功能。Our 2025 wrench carrier, adding a wrench without modifying the tool.+
历程History
行器从 ARC 开始Walkware started with the ARC
最早的一件作品，就是给莱泽曼手柄加的批头支架。三年里一版一版改，最后长成了钳行者。Our very first piece was a bit holder for a Leatherman handle. Three years of revisions later, it grew into Plier Voyager.
手柄批头支架Handle bit holder
Free 和 ARC 手柄侧面加批头位。
Bit slots on the side of Free and ARC handles.
小工具集Small-tool kit
笔夹、六角扳手和瑞士军刀小工具。
A pen clip, hex keys and Swiss Army small tools.
无损携带扳手Wrench carrier
不改钳子，带上一把扳手。
A wrench on board, no modification needed.
侧板 + 侧壳Plates + shell
磁吸体系成型，随后演化成钳行者。
The magnetic system takes shape and leads to Plier Voyager.
视频Video
先看它怎么用See it in use
视频在 B 站，点开在新窗口播放。Videos are on Bilibili, in Chinese, for now.
共 2 条，按时间倒序；更多视频见 B 站 @DeepDIY。2 videos on Bilibili (in Chinese), newest first. More on our Bilibili channel.
配置与购买清单Configure & shopping list
选好配置，照单购买Pick a setup, then shop the list
侧板和侧壳由行器打印。ARC 本身和批头是莱泽曼的产品，按清单自己买；已经有 ARC 的，只买侧板就行。 We print the plates and the shell. The ARC and the bits are Leatherman products you buy yourself; if you already own an ARC, just add the plates.
材料Material
碳纤维 3D 打印Printed in carbon-fibre composites
侧板贴着金属手柄天天摩擦，所以只让磁铁接触，打印表面不受磨损。The plates ride on a steel handle every day, so only the magnets touch and the printed surface stays clean.
深灰磨砂，手感细腻，打印最稳定。
Matte dark grey, fine to the touch, our most consistent print.
更有韧性，耐冲击，适合天天挂在身上。
Tougher and impact-resistant for daily carry.
工程级尼龙，强度和耐热最好。
Engineering nylon with the best strength and heat resistance.
相关系列Related
同一个外轮廓Same outline
钳行者和 ARC 外轮廓一致、磁吸位置相同；连接两者的转接件正在设计中。批头卡见批行客。Plier Voyager shares the ARC outline and magnet positions; an adapter linking the two is in development. For a bit card, see Bit Walker.